| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201 |
- #!/usr/bin/perl
- use strict;
- use warnings;
- use Device::SerialPort;
- use File::Temp qw( tempfile );
- # Prototypes
- sub sendQuery($$);
- sub collectUntil($$);
- # Serial parameters
- my $PORT = '/dev/tty.Projector-DevB';
- # Protocol parameters
- my $CRLF = "\r\n";
- my $DELIMITER = ':';
- # App config
- my $BYTE_TIMEOUT = 500;
- my $SILENCE_TIMEOUT = $BYTE_TIMEOUT * 10;
- my $TEMP_DIR = `getconf DARWIN_USER_TEMP_DIR`;
- chomp($TEMP_DIR);
- my $DATA_DIR = $TEMP_DIR . '/plexMonitor';
- my $CMD_FILE = $DATA_DIR . '/PROJECTOR_CMD';
- # Debug
- my $DEBUG = 0;
- if ($ENV{'DEBUG'}) {
- $DEBUG = 1;
- }
- # Command-line arguments
- my ($DELAY) = @ARGV;
- if (!$DELAY) {
- $DELAY = 15;
- }
- # Sanity check
- if (!-r $PORT || !-d $DATA_DIR) {
- die("Bad config\n");
- }
- # Port init
- my $port = new Device::SerialPort($PORT)
- or die("Unable to open projector serial connection\n");
- $port->read_const_time($BYTE_TIMEOUT);
- $port->lookclear();
- # Projector init (clear any previous state)
- sendQuery($port, '');
- # Track the projector power state
- my $power = -1;
- my $powerLast = $power;
- while (1) {
- # Check for queued commands
- my $cmd = undef();
- if (-r $CMD_FILE) {
- if ($DEBUG) {
- print STDERR "Found projector command file\n";
- }
- # Open and immediately unlink the file (to de-queue the command)
- my $fh;
- open($fh, $CMD_FILE);
- unlink($CMD_FILE);
- # If we got the file open before it disappeared
- if ($fh) {
- my $text = <$fh>;
- chomp($text);
- close($fh);
- if ($DEBUG) {
- print STDERR 'Got raw command: ' . $text . "\n";
- }
- # Check for known commands
- if ($text =~ /OFF/i) {
- $cmd = 'OFF';
- } elsif ($text =~ /ON/i) {
- $cmd = 'ON';
- }
- if ($DEBUG) {
- print STDERR 'Found command: ' . $cmd . "\n";
- }
- }
- # If we got a command, validate it
- if ($cmd) {
- if ($cmd eq 'ON' && $power) {
- $cmd = undef();
- } elsif ($cmd eq 'OFF' && !$power) {
- $cmd = undef();
- }
- }
- # Send the command
- if ($cmd) {
- if ($DEBUG) {
- print STDERR 'Sending command: ' . $cmd . "\n";
- }
- my $result = undef();
- if ($cmd eq 'OFF') {
- $result = sendQuery($port, 'PWR OFF');
- } elsif ($cmd eq 'ON') {
- $result = sendQuery($port, 'PWR ON');
- }
- }
- }
- # Check the power state
- $powerLast = $power;
- $power = 0;
- my $result = sendQuery($port, 'PWR?');
- if ($result =~ /PWR\=(\d+)/) {
- if ($1 > 0) {
- $power = 1;
- }
- }
- # If something has changed, save the state to disk
- if ($powerLast != $power) {
- if ($DEBUG) {
- print STDERR 'New projector power state: ' . $power . "\n";
- }
- my ($fh, $tmp) = tempfile($DATA_DIR . '/PROJECTOR.XXXXXXXX', 'UNLINK' => 0);
- print $fh $power . "\n";
- close($fh);
- rename($tmp, $DATA_DIR . '/PROJECTOR');
- }
- # Delay and loop
- sleep($DELAY);
- }
- # Cleanup
- $port->close();
- undef($port);
- exit(0);
- sub sendQuery($$) {
- my ($port, $query) = @_;
- $port->lookclear();
- my $bytes = $port->write($query . $CRLF);
- if ($DEBUG) {
- print STDERR "\tWrote (" . $bytes . '): ' . $query . "\n";
- }
- my $data = collectUntil($port, $DELIMITER);
- return $data;
- }
- sub collectUntil($$) {
- my ($port, $char) = @_;
- if (length($char) != 1) {
- die('Invalid collection delimiter: ' . $char . "\n");
- }
- # This byte-by-byte reading is not efficient, but it's safe
- # Allow reading forever as long as we don't exceed the silence timeout
- my $count = 0;
- my $string = '';
- while ($count < $SILENCE_TIMEOUT / $BYTE_TIMEOUT) {
- my $byte = $port->read(1);
- if ($byte) {
- $count = 0;
- $string .= $byte;
- if ($DEBUG) {
- print STDERR "\tRead: " . $byte . "\n";
- }
- if ($byte eq $char) {
- last;
- }
- } else {
- $count++;
- }
- }
- # Return undef if there was no data (as opposed to just a delimiter and/or whitespace)
- if (length($string) < 1) {
- if ($DEBUG) {
- print STDERR "Read: <NO DATA>\n";
- }
- return undef();
- }
- # Strip leading or trailing whitespace
- $string =~ s/^\s+//;
- $string =~ s/\s+$//;
- # Strip the trailing delimiter
- $string =~ s/${char}$//;
- # Return our clean string
- if ($DEBUG) {
- print STDERR 'Read: ' . $string . "\n";
- }
- return $string;
- }
|