GxEPD2_wiring_examples.h 2.9 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950
  1. // Display Library example for SPI e-paper panels from Dalian Good Display and boards from Waveshare.
  2. // Requires HW SPI and Adafruit_GFX. Caution: the e-paper panels require 3.3V supply AND data lines!
  3. //
  4. // Display Library based on Demo Example from Good Display: http://www.e-paper-display.com/download_list/downloadcategoryid=34&isMode=false.html
  5. //
  6. // Author: Jean-Marc Zingg
  7. //
  8. // Version: see library.properties
  9. //
  10. // Library: https://github.com/ZinggJM/GxEPD2
  11. // Supporting Arduino Forum Topics:
  12. // Waveshare e-paper displays with SPI: http://forum.arduino.cc/index.php?topic=487007.0
  13. // Good Display ePaper for Arduino: https://forum.arduino.cc/index.php?topic=436411.0
  14. // mapping suggestion from Waveshare SPI e-Paper to Wemos D1 mini
  15. // BUSY -> D2, RST -> D4, DC -> D3, CS -> D8, CLK -> D5, DIN -> D7, GND -> GND, 3.3V -> 3.3V
  16. // NOTE: connect 3.3k pull-down from D8 to GND if your board or shield has level converters
  17. // NOTE for ESP8266: using SS (GPIO15) for CS may cause boot mode problems, use different pin in case, or 4k7 pull-down
  18. // mapping suggestion from Waveshare SPI e-Paper to generic ESP8266
  19. // BUSY -> GPIO4, RST -> GPIO2, DC -> GPIO0, CS -> GPIO15, CLK -> GPIO14, DIN -> GPIO13, GND -> GND, 3.3V -> 3.3V
  20. // NOTE: connect 3.3k pull-down from GPIO15 to GND if your board or shield has level converters
  21. // NOTE for ESP8266: using SS (GPIO15) for CS may cause boot mode problems, use different pin in case, or 3.3k pull-down
  22. // mapping of Waveshare e-Paper ESP8266 Driver Board, new version (see GxEPD2_boards_added.h for old version)
  23. // BUSY -> GPIO5, RST -> GPIO2, DC -> GPIO4, CS -> GPIO15, CLK -> GPIO14, DIN -> GPIO13, GND -> GND, 3.3V -> 3.3V
  24. // NOTE for ESP8266: using SS (GPIO15) for CS may cause boot mode problems, add a 3.3k pull-down in case
  25. // the e-Paper ESP8266 Driver Board should have no boot mode issue, as it doesn't use level converters
  26. // mapping suggestion for ESP32, e.g. LOLIN32, see .../variants/.../pins_arduino.h for your board
  27. // NOTE: there are variants with different pins for SPI ! CHECK SPI PINS OF YOUR BOARD
  28. // BUSY -> 4, RST -> 16, DC -> 17, CS -> SS(5), CLK -> SCK(18), DIN -> MOSI(23), GND -> GND, 3.3V -> 3.3V
  29. // mapping of Waveshare ESP32 Driver Board
  30. // BUSY -> 25, RST -> 26, DC -> 27, CS-> 15, CLK -> 13, DIN -> 14
  31. // NOTE: this board uses "unusual" SPI pins and requires re-mapping of HW SPI to these pins in SPIClass
  32. // see example GxEPD2_WS_ESP32_Driver.ino, it shows how this can be done easily
  33. // new mapping suggestion for STM32F1, e.g. STM32F103C8T6 "BluePill"
  34. // BUSY -> A1, RST -> A2, DC -> A3, CS-> A4, CLK -> A5, DIN -> A7
  35. // mapping suggestion for AVR, UNO, NANO etc.
  36. // BUSY -> 7, RST -> 9, DC -> 8, CS-> 10, CLK -> 13, DIN -> 11
  37. // mapping of Waveshare Universal e-Paper Raw Panel Driver Shield for Arduino / NUCLEO
  38. // BUSY -> 7, RST -> 8, DC -> 9, CS-> 10, CLK -> 13, DIN -> 11
  39. // mapping suggestion for Arduino MEGA
  40. // BUSY -> 7, RST -> 9, DC -> 8, CS-> 53, CLK -> 52, DIN -> 51