zGxEPD2

GxEPD2

Arduino Display Library for SPI E-Paper Displays

• With full Graphics and Text support using Adafruit_GFX

• For SPI e-paper displays from Dalian Good Display

• and SPI e-paper boards from Waveshare

important note :

• the display panels are for 3.3V supply and 3.3V data lines
• never connect data lines directly to 5V Arduino data pins, use e.g. 4k7/10k resistor divider
• series resistor only is not enough for reliable operation (back-feed effect through protection diodes)
• 4k7/10k resistor divider may not work with flat cable extensions or Waveshare 4.2 board, use level converter then
• do not forget to connect GND
• the actual Waveshare display boards now have level converters and series regulator, safe for 5V
• use 3k3 pull-down on SS for ESP8266 for boards with level converters
• note that 7.5" e-paper displays don't work reliable if fed from 3.3V Arduino pin

Paged Drawing, Picture Loop

• This library uses paged drawing to limit RAM use and cope with missing single pixel update support
• buffer size can be selected in the application by template parameter page_height, see GxEPD2_Example
• Paged drawing is implemented as picture loop, like in U8G2 (Oliver Kraus)
• see https://github.com/olikraus/u8glib/wiki/tpictureloop
• Paged drawing is also available using drawPaged() and drawCallback(), like in GxEPD
• // GxEPD style paged drawing; drawCallback() is called as many times as needed
• void drawPaged(void (*drawCallback)(const void*), const void* pv)
• paged drawing is done using Adafruit_GFX methods inside picture loop or drawCallback

Full Screen Buffer Support

• full screen buffer is selected by setting template parameter page_height to display height
• drawing to full screen buffer is done using Adafruit_GFX methods without picture loop or drawCallback
• and then calling method display()

Low Level Bitmap Drawing Support

• bitmap drawing support to the controller memory and screen is available:
• either through the template class instance methods that forward calls to the base display class
• or directly using an instance of a base display class and calling its methods directly

Supporting Arduino Forum Topics:

• Waveshare e-paper displays with SPI: http://forum.arduino.cc/index.php?topic=487007.0
• Good Display ePaper for Arduino : https://forum.arduino.cc/index.php?topic=436411.0

Note on documentation

• GxEPD2 uses Adafruit_GFX for Graphics and Text support, which is well documented there
• GxEPD2 uses meaningful method names, and has some comments in the header files
• consult the header files GxEPD2_BW.h, GxEPD2_3C.h and GxEPD2_GFX.h
• for the concept of paged drawing and picture loop see:
• https://github.com/olikraus/u8glib/wiki/tpictureloop

Supported SPI e-paper panels from Good Display:

• GDEP015OC1 1.54" b/w
• GDEH0154D67 1.54" b/w, replacement for GDEP015OC1
• GDEW0154T8 1.54" b/w 152x152
• GDEW0154M09 1.54" b/w 200x200
• GDEW0154M10 1.54" b/w 152x152 DES
• GDEW0154Z04 1.54" b/w/r 200x200
• GDEH0154Z90 1.54" b/w/r, replacement for GDEW0154Z04
• GDE0213B1 2.13" b/w
• GDEH0213B72 2.13" b/w, replacement for GDE0213B1
• GDEH0213B73 2.13" b/w, new replacement for GDE0213B1, GDEH0213B72
• GDEW0213I5F 2.13" b/w flexible
• GDEW0213Z16 2.13" b/w/r
• GDEH029A1 2.9" b/w
• GDEW029T5 2.9" b/w
• GDEW029Z10 2.9" b/w/r
• GDEW026T0 2.6" b/w
• GDEW027C44 2.7" b/w/r
• GDEW027W3 2.7" b/w
• GDEW0371W7 3.7" b/w
• GDEW042T2 4.2" b/w
• GDEW042Z15 4.2" b/w/r
• ACeP565 5.65" Waveshare 5.65" 7-color e-paper display 600x448
• GDEW0583T7 5.83" b/w
• GDEW0583T8 5.83" b/w 648x460
• GDEW075T8 7.5" b/w
• GDEW075T7 7.5" b/w 800x480
• GDEW075Z09 7.5" b/w/r
• GDEW075Z08 7.5" b/w/r 800x480
• GDEH075Z90 7.5" b/w/r 880x528

• GDEW1248T3 12.48 b/w 1304x984

  Supported SPI e-paper panels & boards from Waveshare: compare with Good Display, same panel

  other supported panels

• ED060SCT 6" grey levels, on Waveshare e-Paper IT8951 Driver HAT

I can and will only support e-paper panels I have!

• promotion panels from suppliers are welcome, to add support to GxEPD2
• donation panels from users are welcome, to add support to GxEPD2

Version 1.2.13

• added support for GDEH0154Z90 1.54" 200x200 b/w/r, replacement for GDEW0154Z04
• GDEH0154Z90 has partial window addressing, but no partial window refresh
• added some missing constructor examples, e.g. for IT8951 Driver HAT on Due

• cleaned-up wiring information in the examples

  Version 1.2.12

• fixed GxEPD2_MinimumExample.ino to draw black on white (white on white was invisible)

• added example GxEPD2_HelloWorld.ino

• updated wiring info and constructor parameters for the actual Waveshare e-Paper ESP8266 Driver Board

• added some missing explicit initializers (nobody noticed as compilers usually initialize simple members)

  Version 1.2.11

• added support for Waveshare 5.65" 7-color e-paper display 600x448

• the unknown controller of this display doesn't support partial update, as far as known

• 7-color graphics support is available with class GxEPD2_7C

• 7-color graphics support requires paging even on ESP32

• 7-color graphics support causes heavy paging on Arduino UNO, gets very slow

• refresh is quite fast for a color e-paper display: 12 seconds

  Version 1.2.10

• added support for GDEH075Z90 7.5" b/w/r 880x528

• the controller of GDEH075Z90 supports partial update, but refesh is full screen

• the controller of GDEH075Z90 doesn't support differential update (not possible on 3-color anyway)

• note: the connector of the GDEH075Z90 is mirrored; connects downward on DESPI-C02

• added optional init parameter "reset_duration" in ms, same default 20ms as before

• reset_duration = 2 may help with "clever" reset circuit of newer boards from Waveshare

  Version 1.2.9

• added support for GDEW0154T8 1.54" b/w 152x152

• added support for GDEW0154M09 1.54" b/w 200x200

• added support for GDEW0154M10 1.54" b/w 152x152 DES

• added support for GDEW0583T8 5.83" b/w 648x460

• added option to use class GFX of library GFX_Root instead of Adafruit_GFX

• differential update on GDEW0154M10 is experimental, there is no partial update demo yet

  Version 1.2.8

• improved transfer speed for the bigger displays (3.71" and up)

  Version 1.2.7

• fix paged drawing of initial screen on GDEH029A1

• sometimes true is false, if applied the wrong way round

  Version 1.2.6

• slightly improved differential refresh for GDEW1248T3

• minor fixes

  Version 1.2.5

• added support for GDEW1248T3 12.84" b/w panel on Waveshare 12.48 e-paper display frame

• tested with Waveshare Epaper ESP32 Driver Board mounted on connection board

• tested with Arduino UNO mounted on connection board, is extremely slow

• doesn't work with Arduino MEGA on connection board with switch set to ICSP and pins bent out of way, reason unknown

• not tested with other processors

• caution: wiring connector is on 5V side of level converters!

  Version 1.2.4

• added support for GDEH0154D67 1.54" b/w, replacement for GDEP015OC1

• added GxEPD2_SerialFlash_Loader, WiFi bitmap downloader for SPI-flash

• added GxEPD2_SerialFlash_Example, SPI-flash example, e.g. for Winbond 25Q16BVSIG

• minor fixes and comment cleanups

• fix refresh(false) in upper layer: add powerOff() after full refresh

  Version 1.2.3

• fixed partial update for 2.13" 3-color and 2.9" 3-color e-paper

• partial update can be disabled with attribute usePartialUpdateWindow = false

• added GxEPD2_GFX_Example to show uses of GxEPD2_GFX base class

• replaced GxEPD2_MultiDisplayExample code, same code as GxEPD2_GFX_MultiDisplayExample

• added extras/examples/GxEPD2_T_MultiDisplayExample, alternate example using template functions

• major and minor fixes, such as typos that survived too long

  Version 1.2.2

• fixed BMP handling, e.g. for BMPs created by ImageMagick

• see also Arduino Forum Topic https://forum.arduino.cc/index.php?topic=642343.0

  Version 1.2.1

• added support for GDEW075T7 7.5" b/w 800x480

• GDEW075T7 has differential update (1.6s) using a charge balancing waveform

• added optional SW SPI support, see /extras/sw_spi/README

• added /extras/tests/GxEPD2_RefreshTests/GxEPD2_RefreshTests.ino, for waveform tuning

• minor fixes

• note that 7.5" e-paper displays don't work reliable if fed from 3.3V Arduino pin

  Version 1.2.0

• added "fast partial update" (differential update) for GDEW0371W7 3.7" b/w 240x416

• improved differential update waveform for GDEW026T0 2.6" b/w 152x256

• fixed init code & improved differential update for GDEW042T2 4.2" b/w 300x400

• note that all differential refresh waveforms are a compromise (ghosting, big font use)

• parameters for differential waveform for these display can easily be changed for experimenting

• GDEW042T2 would have greyed background without sustain phase

• GDEW042T2 needs multiple full refreshes after extended use of partial updates

  Version 1.1.10

• added support for GDEH0213B73 2.13" b/w, replacement for GDE0213B1, GDEH0213B72

• added support for GDEW026T0 2.6" b/w 152x256

• added support for GDEW0371W7 3.7" b/w 240x416

• added support for GDEW075Z08 7.5" b/w/r 800x480

• GDEW075Z08 does allow (slow) partial update, set usePartialUpdate = false to disable for better image

• changed 4.2" b/w waveform table, for better result with actual panels

  Version 1.1.9

• note for ESP8266 when using SS for CS: (wiring suggestion)

• connect 4.7k pull-down from GPIO15 to GND if your board or shield has level converters

• fixes for large displays (use uint16_t for buffer index)

  Version 1.1.8

• fix for incomplete download in GxEPD2_WiFi_Example

• added missing method displayWindow() to GxEPD2_GFX base class

• fix and clean up of initial refresh for panels with differential update

• initial refresh needs to be full update, not "fast partial update", for these panels,

• as the screen content may differ from the "previous buffer" content.

• add clean of controller buffer(s) on initial write to controller, for partial update.

  Version 1.1.7

• enhanced support for full buffered, non-paged use, for processors with enough RAM

• use void display(bool partial_update_mode = false); corresponds to update() in GxEPD

• use added void displayWindow(uint16_t x, uint16_t y, uint16_t w, uint16_t h);

• use added writeImagePart(...), drawImagePart(...), used by displayWindow()

• added example GxEPD2_NotPagedExample.ino

• several fixes, e.g. parameter range check in setPartialWindow()

  Version 1.1.6

• added support for GDEH0213B72 2.13" b/w, replacement for GDE0213B1

• changed SPI speed for IT8951 Driver HAT to 24MHz for write, 10MHz for read

• minor fixes, e.g. centering of text bounding box in GxEPD2_Example

  Version 1.1.5

• added support for 6" ED060SCT on Waveshare e-Paper IT8951 Driver HAT

• uses 3.3V data lines, but 5V supply (~80mA active, ~20mA stand-by, sleep doesn't work)

• note: 5V supply needs to be exact and strong; 5V over diode from USB (e.g. Wemos D1 mini) doesn't work!

• note that the IT8951 Driver HAT is panel specific, with flash parameterized by supplier

• this is an initial version

  Version 1.1.4+

• added GxEPD2_WS_ESP32_Driver example for Waveshare ESP32 Driver Board

  Version 1.1.4

• eliminated double refresh for "fast partial update"

• moved wavetables to the driver classes

• added one explicit drawImage(...) and writeImage(...) method (for removed default paramter values for 1.1.3)

• added init method with added parameter initial, for re-init after processor deep sleep wakeup

• added init parameter pulldown_rst_mode, for special RST handling (not needed for waveshare shield)

  Version 1.1.3

• fixed wavetables for GDEW029T5 and GDEW0213I5F

• fixed drawImage(...) overloaded methods signature matching ambiguity

  Version 1.1.2

• added support for GDEW029T5

• fixed (added) clipping for partial window

• fixed (added) powerOff() after full update (partial update keeps power on)

• added hibernate() for minimum power use by displays that support it

  Version 1.1.1

• 2.7" b/w GDEW027W3 with fast partial update support, based on new demo code wavetable

• mapping suggestion added for Arduino MEGA

• NOTE: use voltage divider resistors for 5V Arduinos, series resistor is not reliable enough

• ConnectingHardware.md updated

  Version 1.1.0

• added support for GDEW0213I5F for 2.13" b/w 104x212 flexible display

• updated GxEPD2_WiFi_Example and GxEPD2_Spiffs_Loader to use BearSSL on ESP8266, for large bitmap downloads

  Version 1.0.9

• add GxEPD2_U8G2_Fonts_Example, e.g. for use of Umlauts ÄÖÜäéöü

• NOTE: you need to SAVE the modified example to a saveable location for UTF-8 characters to work

  Version 1.0.8

• add GxEPD2_SD_AVR_boards_added.h to GxEPD2_SD_AVR_Example

• with example definitions for non-AVR boards (low level display class use example)

  Version 1.0.7

• add GxEPD2_boards_added.h to GxEPD2_Example

• with example definitions for Arduino DUE and MKR1000

  Version 1.0.6

• add buffered drawing option to GxEPD2_WiFi_Example

• allows use with 1.54" 3-color 200x200 display, may also be useful for small bitmaps

  Version 1.0.5

• add buffered drawing option to GxEPD2_SD_Example and GxEPD2_Spiffs_Example

• allows use with 1.54" 3-color 200x200 display, may also be useful for small bitmaps

  Version 1.0.4

• add GxEPD2_GFX base class support (optional, selectable, uses slightly more code)

• base class GxEPD2_GFX can be used to pass references or pointers to the display instance as parameter

• add GxEPD2_GFX_MultiDisplayExample, uses GxEPD2_GFX reference parameter

• modify GxEPD2_MultiDisplayExample for ESP8266 (template issue: class expected instead of typename)

  Version 1.0.3

• fix GxEPD2_SD_Example & GxEPD2_SD_AVR_Example

• add GxEPD2_MultiDisplayExample (preliminary version)

  Version 1.0.2

• initial release version 1.0.2

• tested with ESP8266, ESP32, STM32F103C8T6, AVR Arduino (Pro Mini 3.3V)

• 1.54" 3-color GxEPD2_154c can be used with paging for AVR

• wave tables in program space, 4.2" b/w can be used with GxEPD2_SD_AVR_Example

• issues enabled and welcome, please use Forum Topic for enhancement suggestions

  Version 1.0.1

• pre-release test version

• GxEPD2_SD_AVR_Example added, has no graphics buffer to reduce RAM usage (base display class use)

• issues disabled so far, use Arduino Forum Topics instead

• in this version 1.54" 3-color GxEPD2_154c can only be used with full size buffer (or with no buffer base display class)

  Version 1.0.0

• preliminary version, under construction