| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475 |
- // GENERATED by emit_descriptor from GxEPD2_310_GDEQ031T10 - candidate.
- // Command sequences, plane layout and plane_invert are observed here;
- // for a packed panel bits_per_pixel/palette/blank_code are probe-filled
- // when the colour family is recognised (4-colour/7-colour), else left TODO. A
- // dual-region panel also gets plane_width and a candidate line_order; the
- // exact PAIRED_EDGES row order still wants diag/driver confirmation.
- #pragma once
- #include "epd_command.h"
- namespace esphome::gxepd2 {
- inline const EpdCommand PANEL_310_GDEQ031T10_INIT[] = {
- };
- inline const uint8_t PANEL_310_GDEQ031T10_WINDOW_SEQ0_0_00[] = {0x1E, 0x0D};
- inline const uint8_t PANEL_310_GDEQ031T10_WINDOW_SEQ0_1_00[] = {0x1F, 0x0D};
- inline const uint8_t PANEL_310_GDEQ031T10_WINDOW_SEQ0_3_90[] = {0x00, 0xEF, 0x00, 0x00, 0x01, 0x3F, 0x01};
- inline const EpdCommand PANEL_310_GDEQ031T10_WINDOW_SEQ0[] = {
- {0x00, PANEL_310_GDEQ031T10_WINDOW_SEQ0_0_00, 2, /*delay_before_ms=*/0, /*delay_after_ms=*/1, /*wait_busy_after=*/false},
- {0x00, PANEL_310_GDEQ031T10_WINDOW_SEQ0_1_00, 2},
- {0x91, nullptr, 0},
- {0x90, PANEL_310_GDEQ031T10_WINDOW_SEQ0_3_90, 7},
- };
- inline const uint8_t PANEL_310_GDEQ031T10_REFRESH_1_E0[] = {0x02};
- inline const uint8_t PANEL_310_GDEQ031T10_REFRESH_2_E5[] = {0x5A};
- inline const uint8_t PANEL_310_GDEQ031T10_REFRESH_3_50[] = {0x97};
- inline const EpdCommand PANEL_310_GDEQ031T10_REFRESH[] = {
- {0x92, nullptr, 0, /*delay_before_ms=*/0, /*delay_after_ms=*/1, /*wait_busy_after=*/false},
- {0xE0, PANEL_310_GDEQ031T10_REFRESH_1_E0, 1},
- {0xE5, PANEL_310_GDEQ031T10_REFRESH_2_E5, 1},
- {0x50, PANEL_310_GDEQ031T10_REFRESH_3_50, 1},
- {0x04, nullptr, 0, /*delay_before_ms=*/0, /*delay_after_ms=*/0, /*wait_busy_after=*/true},
- {0x12, nullptr, 0, /*delay_before_ms=*/0, /*delay_after_ms=*/0, /*wait_busy_after=*/true},
- };
- inline const EpdCommand PANEL_310_GDEQ031T10_POWER_OFF[] = {
- {0x02, nullptr, 0, /*delay_before_ms=*/0, /*delay_after_ms=*/0, /*wait_busy_after=*/true},
- };
- inline const uint8_t PANEL_310_GDEQ031T10_HIBERNATE_0_07[] = {0xA5};
- inline const EpdCommand PANEL_310_GDEQ031T10_HIBERNATE[] = {
- {0x07, PANEL_310_GDEQ031T10_HIBERNATE_0_07, 1},
- };
- inline const EpdPanelDescriptor PANEL_310_GDEQ031T10 = {
- .width = 240,
- .height = 320,
- .busy_active_level = false,
- .busy_timeout_ms = 15000, // generous diagnostic ceiling (vendor full_refresh_time 1100ms, 1bpp mono/3-colour class); dev-tunable
- .init_sequence = PANEL_310_GDEQ031T10_INIT,
- .init_sequence_len = sizeof(PANEL_310_GDEQ031T10_INIT) / sizeof(PANEL_310_GDEQ031T10_INIT[0]),
- .window_sequence = {PANEL_310_GDEQ031T10_WINDOW_SEQ0, nullptr},
- .window_sequence_len = {sizeof(PANEL_310_GDEQ031T10_WINDOW_SEQ0) / sizeof(PANEL_310_GDEQ031T10_WINDOW_SEQ0[0]), 0},
- .plane_count = 1,
- .plane_write_cmd = {0x13, 0x00},
- .plane_write_cmd_for_full_refresh = {0x10, 0x00}, // writeImageForFullRefresh also re-writes this "previous RAM" bank before the 0x13 write above - not read by this full-refresh-only engine yet, captured for future partial-refresh use
- .plane_invert = {false, false}, // probe-derived
- .bits_per_pixel = 1, // probe: white fill => all-bits wire byte 0xFF
- .palette = nullptr,
- .palette_len = 0,
- .refresh_sequence = PANEL_310_GDEQ031T10_REFRESH,
- .refresh_sequence_len = sizeof(PANEL_310_GDEQ031T10_REFRESH) / sizeof(PANEL_310_GDEQ031T10_REFRESH[0]),
- .power_off_sequence = PANEL_310_GDEQ031T10_POWER_OFF, // probe: powerOff(), fresh session after a normal refresh
- .power_off_sequence_len = sizeof(PANEL_310_GDEQ031T10_POWER_OFF) / sizeof(PANEL_310_GDEQ031T10_POWER_OFF[0]),
- .hibernate_sequence = PANEL_310_GDEQ031T10_HIBERNATE, // probe: hibernate()'s tail past powerOff() (see file header)
- .hibernate_sequence_len = sizeof(PANEL_310_GDEQ031T10_HIBERNATE) / sizeof(PANEL_310_GDEQ031T10_HIBERNATE[0]),
- };
- } // namespace esphome::gxepd2
|