GxEPD2-esphome/components/gxepd2/panel_266_bn.h

// GENERATED by emit_descriptor from GxEPD2_266_BN - candidate.
// Command sequences, plane layout and plane_invert are observed here;
// for a packed panel bits_per_pixel/palette/blank_code are probe-filled
// when the colour family is recognised (4-colour/7-colour), else left TODO. A
// dual-region panel also gets plane_width and a candidate line_order; the
// exact PAIRED_EDGES row order still wants diag/driver confirmation.
#pragma once
#include "epd_command.h"

namespace esphome::gxepd2 {

inline const uint8_t PANEL_266_BN_INIT_1_01[] = {0x27, 0x01, 0x00};

inline const EpdCommand PANEL_266_BN_INIT[] = {
    {0x12, nullptr, 0, /*delay_before_ms=*/0, /*delay_after_ms=*/10, /*wait_busy_after=*/false},
    {0x01, PANEL_266_BN_INIT_1_01, 3},
};

inline const uint8_t PANEL_266_BN_WINDOW_SEQ0_0_11[] = {0x03};
inline const uint8_t PANEL_266_BN_WINDOW_SEQ0_1_44[] = {0x00, 0x12};
inline const uint8_t PANEL_266_BN_WINDOW_SEQ0_2_45[] = {0x00, 0x00, 0x27, 0x01};
inline const uint8_t PANEL_266_BN_WINDOW_SEQ0_3_4E[] = {0x00};
inline const uint8_t PANEL_266_BN_WINDOW_SEQ0_4_4F[] = {0x00, 0x00};

inline const EpdCommand PANEL_266_BN_WINDOW_SEQ0[] = {
    {0x11, PANEL_266_BN_WINDOW_SEQ0_0_11, 1},
    {0x44, PANEL_266_BN_WINDOW_SEQ0_1_44, 2},
    {0x45, PANEL_266_BN_WINDOW_SEQ0_2_45, 4},
    {0x4E, PANEL_266_BN_WINDOW_SEQ0_3_4E, 1},
    {0x4F, PANEL_266_BN_WINDOW_SEQ0_4_4F, 2},
};

inline const uint8_t PANEL_266_BN_REFRESH_0_22[] = {0xF4};

inline const EpdCommand PANEL_266_BN_REFRESH[] = {
    {0x22, PANEL_266_BN_REFRESH_0_22, 1},
    {0x20, nullptr, 0, /*delay_before_ms=*/0, /*delay_after_ms=*/0, /*wait_busy_after=*/true},
};

inline const uint8_t PANEL_266_BN_POWER_OFF_0_22[] = {0x83};

inline const EpdCommand PANEL_266_BN_POWER_OFF[] = {
    {0x22, PANEL_266_BN_POWER_OFF_0_22, 1},
    {0x20, nullptr, 0, /*delay_before_ms=*/0, /*delay_after_ms=*/0, /*wait_busy_after=*/true},
};

inline const uint8_t PANEL_266_BN_HIBERNATE_0_10[] = {0x01};

inline const EpdCommand PANEL_266_BN_HIBERNATE[] = {
    {0x10, PANEL_266_BN_HIBERNATE_0_10, 1},
};

inline const EpdPanelDescriptor PANEL_266_BN = {
    .width = 152,
    .height = 296,
    .busy_active_level = true,
    .busy_timeout_ms = 15000,  // generous diagnostic ceiling (vendor full_refresh_time 4000ms, 1bpp mono/3-colour class); dev-tunable
    .init_sequence = PANEL_266_BN_INIT,
    .init_sequence_len = sizeof(PANEL_266_BN_INIT) / sizeof(PANEL_266_BN_INIT[0]),
    .window_sequence = {PANEL_266_BN_WINDOW_SEQ0, nullptr},
    .window_sequence_len = {sizeof(PANEL_266_BN_WINDOW_SEQ0) / sizeof(PANEL_266_BN_WINDOW_SEQ0[0]), 0},
    .plane_count = 1,
    .plane_write_cmd = {0x24, 0x00},
    .plane_write_cmd_for_full_refresh = {0x26, 0x00},  // writeImageForFullRefresh also re-writes this "previous RAM" bank before the 0x24 write above - not read by this full-refresh-only engine yet, captured for future partial-refresh use
    .plane_invert = {false, false},  // probe-derived
    .bits_per_pixel = 1,  // probe: white fill => all-bits wire byte 0xFF
    .palette = nullptr,
    .palette_len = 0,
    .refresh_sequence = PANEL_266_BN_REFRESH,
    .refresh_sequence_len = sizeof(PANEL_266_BN_REFRESH) / sizeof(PANEL_266_BN_REFRESH[0]),
    .power_off_sequence = PANEL_266_BN_POWER_OFF,  // probe: powerOff(), fresh session after a normal refresh
    .power_off_sequence_len = sizeof(PANEL_266_BN_POWER_OFF) / sizeof(PANEL_266_BN_POWER_OFF[0]),
    .hibernate_sequence = PANEL_266_BN_HIBERNATE,  // probe: hibernate()'s tail past powerOff() (see file header)
    .hibernate_sequence_len = sizeof(PANEL_266_BN_HIBERNATE) / sizeof(PANEL_266_BN_HIBERNATE[0]),
};

}  // namespace esphome::gxepd2